Guides

How to choose a home espresso machine

The right machine depends less on brand and more on two questions. Do you drink milk drinks, and how much effort do you want to put in each morning?

Updated

The short answer. If you mostly drink straight espresso, a single boiler or a fast thermoblock machine is enough. If you make lattes and cappuccinos every day, look at a heat exchanger or dual boiler, or a thermoblock machine with automatic milk frothing. Whatever you pick, keep part of the budget for a grinder that can do espresso.

Start with how hands-on you want to be

Home machines fall into three groups. This choice matters more than any feature.

Type What you do Good for Trade-off
Semi-automatic Grind, fill and tamp the basket, start and stop the shot People who want to learn and get the best coffee per dollar Takes practice and a good grinder
Super-automatic Press a button. The machine grinds, brews and often froths Convenience and several drinkers in a hurry Less control over taste, more parts to clean
Manual lever Heat water separately and press the shot by hand Small kitchens and straight-espresso drinkers No milk steaming on most models, more steps per shot

Examples of each: the Gaggia Classic and Rancilio Silvia are semi-automatic, the De'Longhi Magnifica and Philips 3200 are super-automatic, and the Cafelat Robot is a manual lever.

The rest of this guide is about semi-automatic machines, because that's where the choices get confusing.

The four ways a machine heats water

Espresso brews with water a little below boiling. Steaming milk needs much hotter water, hot enough to make steam. How a machine handles those two temperatures is the biggest difference between models.

Heating system Brew and steam at once? Heat-up Best fit
Thermoblock or thermocoil No, but switching is quick Fastest, often under a minute Beginners, small counters, a few drinks a day
Single boiler No. You wait between brewing and steaming A few minutes for the boiler Mostly straight espresso
Heat exchanger Yes Slowest, because of the large boiler and heavy group Daily milk drinks
Dual boiler Yes Varies a lot by model Daily milk drinks plus the steadiest brew temperature

A note on heat-up times: the figure a maker quotes is usually how long the boiler takes to get hot. The metal parts the water passes through take longer to warm up, and a machine that isn't fully warm makes cooler, sourer shots. Machines with a heavy traditional group head can need 25 to 30 minutes to warm through. Published figures for the same machine often disagree, so check the manual for the model you're considering.

Thermoblock and thermocoil

Instead of keeping a tank of water hot, these heat water as it flows through a heated metal block or coil. They're ready fast and they're compact. The Breville Bambino range and the De'Longhi Dedica work this way. The Bambino is sold with a quoted heat-up time of 3 seconds. Steam is usually weaker than on a boiler machine, so frothing milk takes a little longer.

Single boiler

One boiler does both jobs, at two different temperatures. You pull the shot, flip a switch, wait for the boiler to get hotter, then steam. Going back to brewing means cooling it down again. That's fine for one cappuccino and tedious for four. The Gaggia Classic and Rancilio Silvia are the well-known examples.

Heat exchanger

One large boiler is kept at steam temperature. Brew water runs through a tube inside it and picks up just enough heat on the way to the coffee. You can brew and steam at the same time, with strong steam. Brew temperature is a little less exact than on a dual boiler. The Lelit Mara X and Profitec Pro 500 are heat exchanger machines.

Dual boiler

There are two boilers, one for brewing and one for steam, each held at its own temperature. This gives the steadiest brew temperature and no waiting. These machines are the biggest, heaviest and most expensive. Examples are the Breville Dual Boiler and the Rancilio Silvia Pro X.

Features worth paying for

Features that matter less than they sound

Before you buy, check these

  1. Counter space and cabinet height. Measure the gap under your cabinets. Many machines fill from the top, so you need room to lift the lid and pour.
  2. Heat-up time against your morning. A machine that needs 25 minutes to warm through suits a smart plug or an early riser. A thermoblock machine suits someone who wants coffee three minutes after waking up.
  3. Your water. Hard water leaves scale that damages boilers. If your water is hard, plan on filtered or softened water from the first day.
  4. Parts and repair. Machines that have been sold for many years tend to have parts and repair guides available.
  5. The grinder. A good machine with a weak grinder makes worse coffee than a modest machine with a good grinder. Read how to choose an espresso grinder before you split the budget.

Which type fits you